Columbia County is committed to ensuring accessibility to this website regardless of disability. If anyone encounters a feature on this website that is inaccessible due to a disability, please contact the County Manger’s Office and the Columbia County Board of County Commissioners at (386) 758-1005. You may also email that office at patrick_weaver@columbiacountyfla.com and provide a brief description of the inaccessible feature. The County will either correct the inaccessible feature or, if correction is not possible due to technical limitations, provide the desired information through alternative means.

Skip to content

Columbia County, FL | Permit Details

Roof Replacement or Repair Permit

Address 231 SW ALBANY TER
FORT WHITE, FL 32038
Parcel #: 01346-000
Acres: 1.37
Owner: Wells Jill S, Wells Jennifer L
Subdivision: Three Rivers Estates Unit 21
Zoning: A-3
Flood Zone: X
District: 2
Application #: 63218
Permit #: 000048547
Related Permit:
Submitted: Tuesday, October 31, 2023
Issued: Tuesday, October 31, 2023
Expires: Tuesday, November 14, 2023
Completed: Tuesday, November 14, 2023
Status: Completed
Septic Release? na
Notes:
PICS & AFFIDAVIT REC'D
Job Details
Finished floor requirement
Fema map number 12023C0467C
Type Roofing Job Replacement - Tear off Existing and Replace
Further Job Details (Explain if decking is being replaced and or Repairs are being done.) Tear off existing metal roof and install new metal on aprox half of home.
Type of structure House
Commercial or Residential Residential
Roof Area (for this job) Sq Ft 16
No. of Stories 1
Roof Pitch 4:12 or Greater
Is the existing roof being removed? Yes
Type of New Roofing Product Metal
Florida Product Approval Number # 17992.1 R3
Product Manufacturer CAPITAL METAL SUPPLY, INC.
Product Description Min. 29 Ga. Capital Rib Roof Panel over 1x4 Wood Purlins over 7/16” OSB
Building Code Edition 2020 Florida Building Code 7th Edition and Florida Statute 553.844
Sealed roof decking options: (Must select an option.) a minimum 4-inch wide strip of selfadhering polymer-modified bitumen complying with ASTM D1970 or a minimum 3 ¾ - inch wide strip of selfadhering flexible flashing tape complying with AAMA 711, applied over all joints in the roof decking. A felt underlayment complying with ASTM D226 Type II, ASTM D4869 Type Ill or IV, or ASTM D6757, or a synthetic underlayment meeting the performance requirements specified, is required to be applied over the strips/tape over the entire roof.
Ventilation: Ridge Vent
Flashing: Use Existing
Drip Edge: Replace All
Valley Treatment: New Metal
Any cable and/or race-way wiring located on or within the roof assembly? No
Review Notes
10/31/2023 Application pending.
10/31/2023 Application submitted by applicant.
10/31/2023 Final Review - Payment Needed
10/31/2023 Permit Issued Permit # created and approved from payment.
Contractors
Name/ Business License Title Role
Tyler M Turner
Tmt Roofing Llc
CCC1330410 Cert Roofing Contractor
Inspections
Inspection Notes Performed By Date
Passed: Re-Roof - In Progress Matt Forsyth 11/13/2023
Passed: Re-Roof - Final Matt Forsyth 11/14/2023