- Finished floor requirement
-
- Fema map number
- 12023C0311D
- Type Roofing Job
- Replacement - Tear off Existing and Replace
- Further Job Details (Explain if decking is being replaced and or Repairs are being done.)
- Remove existing roofing and properly dispose. Furnish and install ice and water shield where applicable.
Furnish and install fiberglass dimensional shingle.
Furnish and install all accessories that may include drip edge, pipe boots, and flashing.
Erie to remove existing roofing and properly dispose. Erie to furnish and install
ice and water shield where applicable.
Erie to furnish and install fiberglass dimensional shingle.
Erie to furnish and install all accessories that may include drip edge, pipe boots,
and flashing.
Erie to vent roof properly.
Erie to furnish and install Premium Synthetic Underlayment.
Erie to prep roof for low-slope application.
Erie to furnish and install decking with OSB where applicable.
Erie to furnish and install wood fascia
Vent roof properly.
Furnish and install Premium Synthetic Underlayment.
Prep roof for low-slope application.
Furnish and install decking with OSB where applicable.
Furnish and install wood fascia
- Type of structure
- House
- Commercial or Residential
- Residential
- Roof Area (for this job) Sq Ft
- 3096
- No. of Stories
- 1
- Roof Pitch
- 2:12 to 4:12
- Is the existing roof being removed?
- Yes
- Type of New Roofing Product
- Asphalt Shingles
- Florida Product Approval Number
- FL 30310.1
- Other Roofing Product Type Not Listed
- MOD-BIT/ SA Base + Cap (FL2533.1), Standard Ridge (FL6267.1), 2 Layers Synthetic Veer Ultra (FL20767.1)
- Product Manufacturer
- IKO DYNASTY
- Product Description
- Shingle
- Building Code Edition
- 2023 Florida Building Code 8th Edition and 2020 National Electrical Code
- Sealed roof decking options: (Must select an option.)
- two layers of felt underlayment comply ASTM 0226 Type II or ASTM D4869 Type Ill or IV, or two layers of a synthetic underlayment meeting the performance requirements specified, lapped and fastened as specified.
- Ventilation:
- Ridge Vent
- Flashing:
- Use Existing
- Drip Edge:
- Replace All
- Valley Treatment:
- New Mineral Surface
- Second Roof Pitch (if applicable)
- Less than 2:12
- Any cable and/or race-way wiring located on or within the roof assembly?
- No