- Finished floor requirement
-
- Fema map number
- 12023C0508C
- Type Roofing Job
- Replacement - Tear off Existing and Replace
- Further Job Details (Explain if decking is being replaced and or Repairs are being done.)
- Remove existing shingle roof and install new standing seam metal
- Type of structure
- House
- Commercial or Residential
- Residential
- Roof Area (for this job) Sq Ft
- 32
- No. of Stories
- 1
- Roof Pitch
- 4:12 or Greater
- Is the existing roof being removed?
- Yes
- Type of New Roofing Product
- Metal
- Florida Product Approval Number
- FL46717_R0_II
- Product Manufacturer
- Capital Metal Supply
- Product Description
- Standard Requirements for Metal Roofing Systems, on their 26Ga 1” Nailstrip Roof Panels.
- Building Code Edition
- 2023 Florida Building Code 8th Edition and 2020 National Electrical Code
- Sealed roof decking options: (Must select an option.)
- a minimum 4-inch wide strip of selfadhering polymer-modified bitumen complying with ASTM D1970 or a minimum 3 ¾ - inch wide strip of selfadhering flexible flashing tape complying with AAMA 711, applied over all joints in the roof decking. A felt underlayment complying with ASTM D226 Type II, ASTM D4869 Type Ill or IV, or ASTM D6757, or a synthetic underlayment meeting the performance requirements specified, is required to be applied over the strips/tape over the entire roof.
- Ventilation:
- Ridge Vent
- Flashing:
- Use Existing
- Drip Edge:
- Replace All
- Valley Treatment:
- New Metal
- Any cable and/or race-way wiring located on or within the roof assembly?
- No