| Type Roofing Job |
Replacement - Tear off Existing and Replace |
| Further Job Details (Explain if decking is being replaced and or Repairs are being done.) |
Remove existing metal and install new 26 gauge PBR |
| Type of structure |
Storage or Garage Building |
| Commercial or Residential |
Residential |
| Roof Area (for this job) Sq Ft |
62 |
| No. of Stories |
1 |
| Ventilation: |
Ridge Vent |
| Flashing: |
Use Existing |
| Drip Edge: |
Replace All |
| Valley Treatment: |
New Metal |
| Roof Pitch |
4:12 or Greater |
| Any cable and/or race-way wiring located on or within the roof assembly? |
No |
| Is the existing roof being removed? |
Yes |
| Type of New Roofing Product |
Metal |
| Florida Product Approval Number |
FL # 20147.1 R3 |
| Product Manufacturer |
CAPITAL METAL SUPPLY |
| Product Description |
26 Ga. Capital PBR Roof Panel over open framing |
| Sealed roof decking options: (Must select an option.) |
a minimum 4-inch wide strip of selfadhering polymer-modified bitumen complying with ASTM D1970 or a minimum 3 ¾ - inch wide strip of selfadhering flexible flashing tape complying with AAMA 711, applied over all joints in the roof decking. A felt underlayment complying with ASTM D226 Type II, ASTM D4869 Type Ill or IV, or ASTM D6757, or a synthetic underlayment meeting the performance requirements specified, is required to be applied over the strips/tape over the entire roof.;Other (explain) |
| Sealed roof decking explanation for other option. |
Open purlin over part of barn.
There is a section of barn that is enclosed- over this area we will be installing the bitumen strip and synthetic underlayment. |
| Building Code Edition |
2023 Florida Building Code 8th Edition and 2020 National Electrical Code |
| Fema map number |
12023C0260C |
