| Type Roofing Job |
Replacement - Tear off Existing and Replace |
| Further Job Details (Explain if decking is being replaced and or Repairs are being done.) |
Remove existing shingles and replace with new shingles on single family residence and add 3 sq. of modified bitumen on back flat section of roof. |
| Type of structure |
House |
| Commercial or Residential |
Residential |
| Roof Area (for this job) Sq Ft |
2480 |
| No. of Stories |
1 |
| Ventilation: |
Ridge Vent |
| Flashing: |
Replace All |
| Drip Edge: |
Replace All |
| Valley Treatment: |
Use Existing |
| Roof Pitch |
2:12 to 4:12 |
| Any cable and/or race-way wiring located on or within the roof assembly? |
No |
| Is the existing roof being removed? |
Yes |
| Type of New Roofing Product |
Asphalt Shingles |
| Florida Product Approval Number |
FL#10674.1 |
| Product Manufacturer |
Owens Corning |
| Product Description |
3-tab, 4-tab, laminated, starter and hip & ridge shingles for use in FBC non-HVHZ jurisdictions. |
| Sealed roof decking options: (Must select an option.) |
a minimum 4-inch wide strip of selfadhering polymer-modified bitumen complying with ASTM D1970 or a minimum 3 ¾ - inch wide strip of selfadhering flexible flashing tape complying with AAMA 711, applied over all joints in the roof decking. A felt underlayment complying with ASTM D226 Type II, ASTM D4869 Type Ill or IV, or ASTM D6757, or a synthetic underlayment meeting the performance requirements specified, is required to be applied over the strips/tape over the entire roof.;two layers of felt underlayment comply ASTM 0226 Type II or ASTM D4869 Type Ill or IV, or two layers of a synthetic underlayment meeting the performance requirements specified, lapped and fastened as specified. |
| Building Code Edition |
2023 Florida Building Code 8th Edition and 2020 National Electrical Code |
| Fema map number |
12023C0495C |
