| Finished floor requirement |
|
| Fema map number |
12023C0383D |
| Type Roofing Job |
Replacement - Tear off Existing and Replace |
| Further Job Details (Explain if decking is being replaced and or Repairs are being done.) |
remove all shingles, replace rotted decking (estimated approx 400 SF) install new shingles |
| Type of structure |
Storage or Garage Building |
| Commercial or Residential |
Residential |
| Roof Area (for this job) Sq Ft |
1670 |
| No. of Stories |
2 |
| Roof Pitch |
4:12 or Greater |
| Is the existing roof being removed? |
Yes |
| Type of New Roofing Product |
Asphalt Shingles |
| Florida Product Approval Number |
FL39780-R1 |
| Product Manufacturer |
GAF |
| Product Description |
Asphalt Shingle |
| Building Code Edition |
2020 Florida Building Code 7th Edition and Florida Statute 553.844 |
| Sealed roof decking options: (Must select an option.) |
a minimum 4-inch wide strip of selfadhering polymer-modified bitumen complying with ASTM D1970 or a minimum 3 ¾ - inch wide strip of selfadhering flexible flashing tape complying with AAMA 711, applied over all joints in the roof decking. A felt underlayment complying with ASTM D226 Type II, ASTM D4869 Type Ill or IV, or ASTM D6757, or a synthetic underlayment meeting the performance requirements specified, is required to be applied over the strips/tape over the entire roof. |
| Ventilation: |
Unvented |
| Flashing: |
Replace All |
| Drip Edge: |
Replace All |
| Valley Treatment: |
New Metal |
| Second Roof Pitch (if applicable) |
2:12 to 4:12 |
| Any cable and/or race-way wiring located on or within the roof assembly? |
No |
