- Finished floor requirement
-
- Fema map number
- 12023C0270C
- Type Roofing Job
- Overlay with Metal
- Type of structure
- Storage or Garage Building
- Commercial or Residential
- Residential
- Roof Area (for this job) Sq Ft
- 0.00
- No. of Stories
- 1
- Roof Pitch
- 4:12 or Greater
- Is the existing roof being removed?
- No
- Type of New Roofing Product
- Metal
- Florida Product Approval Number
- FL17992-1 R3
- Product Manufacturer
- Capital Metal Supply, INC.
- Product Description
- Min. 19 Ga. Capital Rib Roof Panel over 1x4 Wood Purlins over 7/16" OSB
- Building Code Edition
- 2020 Florida Building Code 7th Edition and Florida Statute 553.844
- Sealed roof decking options: (Must select an option.)
- a minimum 4-inch wide strip of selfadhering polymer-modified bitumen complying with ASTM D1970 or a minimum 3 ¾ - inch wide strip of selfadhering flexible flashing tape complying with AAMA 711, applied over all joints in the roof decking. A felt underlayment complying with ASTM D226 Type II, ASTM D4869 Type Ill or IV, or ASTM D6757, or a synthetic underlayment meeting the performance requirements specified, is required to be applied over the strips/tape over the entire roof.
- Ventilation:
- Ridge Vent
- Flashing:
- Use Existing
- Drip Edge:
- Replace All
- Valley Treatment:
- New Metal